Penton Owners Group
Penton Owners Group
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 General Discussion
 Penton Talk
 Sachs Ignition Crank Pin Question
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

KJDonovan
Advanced Member

USA
582 Posts

Posted - 09/04/2017 :  3:49:31 PM  Show Profile  Reply with Quote
Does anyone know if the ignition side crank pin (spindle) on a 6B crank is just pressed fit into the crank lobe or silver soldered as well? Just to be clear I'm referring to the pin/spindle the motoplat bolts to not the tapered pin for the crank bearing.

Thanks,

Kevin

Edited by - KJDonovan on 09/04/2017 3:57:53 PM

gooddirt
Advanced Member

USA
1247 Posts

Posted - 09/05/2017 :  3:58:04 PM  Show Profile  Reply with Quote
They are pressed only on the -A- motor. The -B- motor is part of the crank; one unit, Al needs to know this ... suppose it could be machined to work.

Edited by - gooddirt on 09/05/2017 4:02:33 PM
Go to Top of Page

KJDonovan
Advanced Member

USA
582 Posts

Posted - 09/05/2017 :  5:16:42 PM  Show Profile  Reply with Quote
Thanks Larry, that's exactly what I needed to know. I saw then pins on Al's site listed as being for "A" or "B" cranks, but could never find the seam where the pin is inserted into the lobe, that's why I asked if they were silver soldered in.

Thanks,

Kevin
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Penton Owners Group © 2001-2015 Penton Owners Group. All Rights Reserved Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06